Interface configuration

The drawing elements are activated in the PRO version of the MoonBot terminal if the Moon Scalper module is present and the “Pencil” button is enabled. Inside the menu “Pencil”, there is a drawing element “Pen”, with which, if you press the CTRL button on the keyboard you can draw elements on the chart with […]

To do this, right-click on the Hvol icon in the main window of the MoonBot terminal and set the TimeFrame parameter to Max. After that, on the left side of the chart you will see a gray volume histogram for 42 hours. The top and bottom borders will be a trading price range for this

To do this, right-click on the Hvol icon in the main window of the MoonBot terminal and set the TimeFrame parameter to Max. After that, on the left side of the chart you will see a gray volume histogram for 42 hours. The upper and lower limits will be the trading price range for this

Yes, you need to choose the ranges of volatility of BTC rate per hour at the tab Settings – Autostart: “Hourly BTC rate drops more then (%) -X.XX”, “Or hourly BTC rate rise more then (%) +X.XX”, check the “Alarm If BTC rate changed” parameter and choose the sound signal type below. If the BTC

Yes, to do this, open the Settings – Settings Wizard tab with the settings and click on the “Templates” tab, where you can select a number of templates with preset basic parameters and click Apply. But to get a more thorough understanding of the MoonBot terminal functionality, we recommend you to read the manual on

Yes, to do this, on the tab Settings – Autostart you need to put a tick mark against the parameter: “Auto Stop if Ping > 1000 ms” and to the right of the slider you need to set the threshold of ping (from 100 to 2000 ms), at which MoonBot will stop. In addition, check

Yes, to do that you need to put a tick in the Settings – Autostart tab against the parameter “Blink the rate label If BTC rate changed” and below select the ranges of BTC rate volatility per hour: “Hourly BTC rate drops more then (%) -X.XX”, “Or hourly BTC rate rise more then (%) +X.XX”.

Yes, to do this, on the tab Settings – Autostart you need to put a tick mark in front of the parameter: “Auto Stop if Ping > 1000 ms” and on the right side of the slider to set your desired threshold ping (from 100 to 2000 ms), at which MoonBot will stop. Additionally below,

Yes, to do this, on the tab Settings – Autostart you need to check the box “Auto Stop if errors level > = 3” and on the right side put the desired error threshold (from 1 to 5), at which MoonBot will stop. In addition, check the “Restart in 60 minutes” option below and set

Yes, to do this on the tab Settings – Autostart you need to put a tick mark against the parameter: “Auto Stop if Ping > 1000 ms” and on the right side of the slider to set your desired threshold ping (from 100 to 2000 ms), at which MoonBot will stop.