FAQs

In the MoonBot terminal, on the User Interface tab of the strategy settings, the following parameters are located: DontWriteLog: (NO/YES), the default is NO. If YES, do not write the log for this strategy’s orders. The DontWriteLog=YES checkbox can be checked only in the emulator mode of the strategy (EmulatorMode=YES). DontKeepOrdersOnChart: (NO/YES), default is NO. […]

Yes, you can. To do this, close the MoonBot terminal and go to the folder where it is installed, find the data folder that has the archive file sounds.zip. This file contains the sound signals in .wav format. If you need to add your signal, add it in .wav format to this archive, then run

Yes, you can. To do that, click on your strategy in the MoonBot terminal and in the Main tab near the KeepAlert parameter specify how many seconds to keep the button with the coin name above the chart. If you specify 5 in this field, the button will disappear after 5 seconds.

In MoonBot, click on your strategy in the strategy window and on the Main tab check the SoundAlert=YES option, then when the signal triggers a sound alert and a button with the name of the coin from the signal will appear, which, when clicked, will open its chart.

Yes, you can. To do this, click on your strategy in the MoonBot terminal in the strategy window and on the Main tab near the SoundKind parameter you will see a list of preset signals. You can select a signal from this list and then save the strategy.

Yes, this can be configured. In the MoonBot terminal, click on your strategy that should place orders in the emulator mode and check the “YES” box near the EmulatorMode parameter in the Main tab so the strategy will work in the emulator mode. If you uncheck the box and the inscription “NO” appears, the strategy

The MoonBot terminal must be connected to Telegram. Next, to switch the strategy in the emulator mode, you need to remotely through Telegram give the command SetParam Name1 EmulatorMode YES. After sending this command, the strategy with the name “Name1” will be found, the EmulatorMode parameter will be switched to “YES” and the strategy will

The MoonBot terminal must be connected to Telegram. Further, to disable the function of receiving reports on trades in your channel remotely through the Telegram give the command SetParam Name1 ReportTradesToTelegram NO. After sending this command a strategy named “Name1” will be found, the ReportTradesToTelegram parameter will be switched to “NO” and deal reports will

The MoonBot terminal must be connected to Telegram. Next, to disable the function of receiving signal messages to your telegram channel you must remotely via Telegram give the command SetParam Name1 ReportToTelegram NO. After sending this command the strategy with the name “Name1” will be found, the ReportToTelegram parameter will be switched to “NO” and

In MoonBot in the strategies window, click on your strategy and on the Main tab near the ReportTradesToTelegram parameter, check the box so that “YES” appears, in which case you will report trades to your Telegram Channel. If you uncheck the box and “NO” appears, no reports will be sent to your channel.